Installation under
Mac OS X
This text describes the driver
installation for the DSP24, DSP24 MK II, DSP24 System III,
DSP2000 C-Port and DSP3000 M-Port under Mac OS X. You can get
latest drivers from the download section on the ST Audio webpage as a compressed
installer package. Please note that we strongly recommend to use at least version
10.2 of Mac OS X (Jaguar).
This explaination expects that
you have currently not installed any driver for your DSP24 series card. It also
expects that you have installed the card already into a free PCI slot of your
Macintosh system. If you have not done this, please do so before you continue.
| • |
Download
the .sit file. Then double click on the downloaded file to uncompress it
if that has not been done automatically. |
| • |
 Doubleclick
on the .pkg file that was created in the same folder. The screen on the
right will appear. In some cases you have to enter your password. Click
Continue.
|
| • |
 The
Select a Destination screen will appear. Please select the destination
disk to install the drivers. You should use the same volume that you use
for the system installation. Usually this volume is called Macintosh
HD. Then select Continue.
|
| • |
Please follow the instructions on screen. The files are now copied to your
system. |
| • |
When
the installation is finished, please shutdown and reboot your system - the
DSP24 drivers will now be loaded automatically. To control the settings
of the card, open the DSP24 Settings [1]
utility from your applications folder. |
>>
Back to Knowledge Base <<
last
updated: 11/18/2002
author:
Claus
Riethmüller
Einige
der genannten Waren- oder Firmennamen sind eingetragene Warenzeichen ihrer jeweiligen
Hersteller und unterliegen daher den entsprechenden gesetzlichen Bestimmungen.
Seite zuletzt aktualisiert am 17.04.2005.
